Hyundai HX19E Mini Excavator service manual
Choose your manual
About the Hyundai Construction Equipment Mini Excavators
Hyundai factory service manuals for mini excavators under 10 tonnes: 58 models from the R15-7 to the HX85A and HX90A.
Hyundai HX19E Mini Excavator - Factory Service Manual
This is Hyundai's factory service manual for the HX19E mini excavator, as a PDF. It runs to 469 pages in 7 sections: the same workshop manual Hyundai dealers use.
It covers the Hyundai HX19E mini excavator.
The HX19E at a glance
These figures are taken from the specifications section of this manual.
| Operating weight | 2,230 kg (4,920 lb) |
| Bucket capacity | 0.04 m³ (0.05 yd³) heaped |
| Max. digging depth | 2.34 m (7' 8") |
About the Hyundai HX19E mini excavator
Mini excavators work in tight spaces: utility trenches, landscaping and demolition inside buildings. Most problems on them come from the hydraulic pump and control valve, the swing and travel motors, and the small diesel engine, and these are the systems a workshop manual is needed for.
What is inside, section by section
Its chapters cover the engine, the hydraulic system, the electrical system, the undercarriage, swing and travel, the work equipment, specifications, troubleshooting and fault codes and maintenance.
- General (32 pages) - safety hints, specifications.
- Structure and function (74 pages) - pump device, main control valve, swing device, travel device, RCV lever, RCV pedal.
- Hydraulic system (32 pages) - hydraulic circuit, main circuit, pilot circuit, single operation, combined operation.
- Electrical system (120 pages) - component location, monitoring system, electrical circuit, electrical component specification, connectors, fault codes.
- Troubleshooting (32 pages) - before troubleshooting, hydraulic and mechanical system, electrical system.
- Maintenance standard (36 pages) - operational performance test, major components, track and work equipment.
- Disassembly and assembly (143 pages) - precaution, tightening torque, pump device, main control valve, swing device, travel device, RCV lever, turning joint, boom, arm and bucket cylinders, undercarriage, work equipment.
What you can do with it
- Find the cause of a fault before replacing parts
- Remove, overhaul and refit major components
- Set pressures, clearances and adjustments to the factory values
- Use the right torque values and tightening sequences
- Read the wiring and hydraulic diagrams when tracing a problem
Who uses it
Owners, contractors and rental shops that keep the HX19E running: tracing a hydraulic or electrical fault, checking wear against Hyundai's limits, or rebuilding a cylinder, swing or travel motor.
Make sure it is your model
This manual is for the HX19E. The HX19A has a separate manual. Check the model plate on your machine before ordering.
Questions about this manual
Which machines does this manual cover?
The Hyundai HX19E. If your machine has a different model number, look for the manual for that model.
Is it the original manufacturer manual?
Yes. It is Hyundai's own service manual, not a third-party reprint or a summary.
How many pages does it have?
469 pages, in 7 parts listed above.
How do I receive it?
It is a PDF. After payment it is available to download from your account, and you can read it on a computer, tablet or phone or print the pages you need. No printed book is shipped.
