CLAAS ARES 696-616 RZ, RC, RX (Type A04) Tractor Repair Manual

CLAAS ARES 696-616 RZ, RC, RX (Type A04) Tractor Repair Manual

This is the CLAAS ARES 696-616 RZ, RC, RX (Type A04) tractor repair manual, as a PDF. It runs to 1240 pages in 42 chapters.

It covers the CLAAS ARES 696-616 RZ, RC, RX tractor, CLAAS type number A04. It is CLAAS's own repair manual from the CLAAS service documentation, the same information the dealer workshops repair these machines with.

About the CLAAS ARES 696-616 RZ, RC, RX

A modern tractor is engine, transmission, hydraulics and electronics working together: the powershift or CVT gearbox, the PTO, the front and rear axles, the lift hitch and the CAN-bus controls. The manual gives the procedures and settings for each.

What is inside

The largest sections are Chapter F - ITEM LIST WIRING AND GENERAL LISTS (160 pages), Chapter A2 - D.P.S.ENGINE (100 pages) and Chapter B1 - GEARBOX GBA 20 (92 pages). The chapters are:

• Chapter A00 - Overview (7 pages)
• Chapter A0 - INJECTION DATA SHEETS (28 pages)
• Chapter A1 - SUPPLY INJECTION (46 pages)
• Chapter A2 - D.P.S.ENGINE (100 pages)
• Chapter A3 - INJECTION ADDITIVE TIER II (14 pages)
• Chapter A4 - ENGINE ADDITIVE TIER II (14 pages)
• Chapter B00 - Overview (7 pages)
• Chapter B1 - GEARBOX GBA 20 (92 pages)
• Chapter B2 - HYDRAULIC CIRCUIT LOW PRESSURE (42 pages)
• Chapter B3 - GEARBOX ADDITIVE TIER II (6 pages)
• Chapter B4 - LOW PRESSURE HYDRAULIC CIRCUIT ADDITIVE TIER II (12 pages)
• Chapter C00 - Overview (6 pages)
• Chapter C0 - GENERAL CONTENTS (2 pages)
• Chapter C1 - REAR AXLE (66 pages)
• Chapter C2 - SERVICE BRAKES - HAND BRAKE (32 pages)
• Chapter C3 - 4WD DROPBOX (14 pages)
• Chapter C4 - REAR AXLE ADDITIVE TIER II (8 pages)
• Chapter D00 - Overview (5 pages)
• Chapter D1-1 - STANDARD FRONT AXLE (33 pages)
• Chapter D1-2 - PROACTIV FRONT AXLE (54 pages)
• Chapter E00 - Overview (6 pages)
• Chapter E1 - OPEN CENTRE HYDRAULICS (58 pages)
• Chapter E2 - CLOSED CENTRE HYDRAULICS (46 pages)
• Chapter E3 - CLOSED CENTRE HYDRAULICS (100 L/MIN) (22 pages)
• Chapter F - ITEM LIST WIRING AND GENERAL LISTS (160 pages)
• Chapter F00 - Overview (6 pages)
• Chapter G00 - Overview (7 pages)
• Chapter G1 - INSTRUMENT PANEL (32 pages)
• Chapter G2 - TCE 15/25, TCE 15T, ELECTRONIC LIFT (24 pages)
• Chapter G3 - DRIVETRONIC III (66 pages)
• Chapter G4 - INFOTRAC AND ISO SOCKET (19 pages)
• Chapter G5 - ELECTROPILOT (20 pages)
• Chapter G6 - DRIVETRONIC III TIER II ADDITIVE (16 pages)
• Chapter G7 - ENGINE MANAGEMENT TIER II (52 pages)
• Chapter H00 - Overview (2 pages)
• Chapter H1 - CAB (24 pages)
• Chapter H2 - HEATING / AIR CONDITIONING (22 pages)
• Chapter H3 - WINDSCREEN BONDING (18 pages)
• Chapter J - FRONT LIFT AND POWER TAKE OFF (18 pages)
• Chapter J00 - Overview (4 pages)
• Chapter J1 - LIFT AND FRONT POWER TAKEOFF (14 pages)
• Chapter J2 - PNEUMATIC BRAKING (14 pages)

What you can do with it

• Find the cause of a fault before replacing parts
• Remove, overhaul and refit major components
• Set pressures, clearances and adjustments to the factory values
• Use the right torque values and tightening sequences
• Follow the exploded views and photos when taking assemblies apart

Questions and answers

Which machines does this manual cover?
The CLAAS ARES 696-616 RZ, RC, RX, type A04. The type number is on the machine's identification plate. If your machine has a different type number, look for the manual for that type.

Is it the original manufacturer manual?
Yes. It is CLAAS's own repair manual, not a third-party reprint or a summary.

How many pages does it have?
1240 pages, in 42 chapters listed above.

How do I receive it?
It is a PDF, available as an instant download right after payment. You can read it on a computer, tablet or phone or print the pages you need. No printed book is shipped.